Dear Valued Customers, updates as of 1/07/2017:

  • Orders outside of 2 day ground area will get their orders shipped out via 2-3 day priority mail, this means our customers on the east coast will get items faster. Note, any long items such as hex stock etc.. will not be shipped at that speed. Our mission is to get parts to you as fast as possible. 
  • MCC Robot Release is available here: Full details will be available on 01/13/2017. Follow us on Facebook, Twitter and Instagram to get sneak peaks and live updates. 
  • For Customer Support, email is fastest and suggested, please email Calls will be returned when possible, we HIGHLY suggest to just email the support email. 
  • To close this panel please click the x to the right ---->
Call +559-380-9909: 10am - 3pm PST


Victor SPX

The Victor 883 Motor Controller, revolutionary for its time, was the first product ever designed by Innovation First. Nearly twenty years later, the Victor SPX is the fifth generation of motor controllers designed for the FIRST® Robotics Competition. Designed in collaboration with CTR Electronics, the Victor SPX is 10% smaller and 25% lighter than the Victor SP, making it the smallest and lightest motor controller in FIRST Robotics Competition history.

In addition to PWM, this next generation of Victor now supports CAN. The Victor SPX also brings over many of the features from the Talon, including voltage control and closed loop position control.

Each Victor SPX comes with male and female 0.1" servo connectors on the ends of the CAN wires, making it easier for FIRST Robotics Competition teams to connect their Victor SPX to the CAN bus network that is already on their robot. Teams that aren't ready to make the jump to CAN bus can use these connectors to connect to the PWM outputs of the roboRIO (female connector) and the VEX ARM® Cortex®-based Microcontroller (male connector).

Other features include:

  • Follow mode - allows Victors and Talons to follow each other

  • Programmable deadband - set the deadband of your Victor SPX from 25% down to 0.1%, the lowest deadband of any FIRST® Robotics Competitionmotor controller in the market.

  • Closed Loop position control using CAN based sensors such as the Pigeon IMU.

SKU: 217-9191

Availability: In stock




Victor SPX Talon SRX Victor SP
Dimensions 2.50” x 1.16” x 0.77” 2.75" x 1.185" x 0.96" 2.5" x 1.125" x 0.875"
Weight (Without Wires) 0.12 lb 0.19 lb 0.16 lb
Communication Protocols PWM, CAN PWM, CAN. SPI,
USART (serial)
Direct Sensor Input No Yes No
Nominal Voltage 12V 12V 12V
Min / Max Voltage 6-16V 6-28V 6-16V
Continuous Current 60A 60A 60A
Surge Current (2 sec) 100A 100A 100A
PWM Input Pulse
(high time)
1-2 ms nominal 1-2 ms nominal 1 - 2 ms nominal,
0.6-2.4 ms max
PWM Input Rate
2.9 - 100 ms 2.9 - 100 ms 2.9 - 100 ms
PWM Output Chop Rate
(Switching Frequency)
15 kHz 15 kHz 15 kHz
Minimum Throttle
0.1% - 25%
(4% Default)
0.1% - 25%
(4% Default)

Tech Specs


Kit Contents Victor SPX Motor Controller (Power, Ground, Output, CAN and PWM cables come pre-attached)
Downloads & Docs Victor SPX Info Sheet
Outputs Powers brushed DC motors with variable speed forward, reverse, or off.
Can NOT be used with Brushless motors.
Material Type Lightweight plastic housing
Material Finish Black Anodized heatsink for superior performance & heat dissipation
CAD Model Victor SPX (217-9191) STEP
Drawing Victor SPX Drawing
  • Victor SPX without wires - .12 lbs
  • Wire weight - .07 lbs
  • Victor SPX with wires - .19 lbs