Call +559-380-9909: 10am - 3pm PST

Greyt Universal Elevator

The Greyt Universal Elevator is a kit including bearings, plates, spacers, and hardware for a two stage cascade elevator (Additional items required for functionality, check Tech Specs below for more information). This design is the COTS implementation of years of experience with elevators on The Greybots.


Elevator can be built to whatever specifications fit your need. Look under Tech Specs for recommended configurations!


Note: Elevator requires 6 full 1" x 2" Aluminum Tubes to build


ETA: All new orders will be fulfilled by 02/22

SKU: greytuniversalelevator

Availability: In stock

$349.99
  • - In Stock
  • - Out Of Stock
  • - Backorder

Description

Details

-

Tech Specs

Details

Recommended Setup
Base Elevator:
  • (1) Greyt Universal Elevator (Base Kit) 
  • (1) 16t Aluminum Hub Sprocket (#25 Chain, 1/2" Bearing Bore)
  • (1) 16t Aluminum Hub Sprocket (#25 Chain, 1/2" Hex Bore)
  • (1) Delrin Washer (1/8") - 3/8" Hex ID - 10 pk
  • (1) Delrin Washer (1/4") - 1/2" Hex ID - 10 pk
  • (1) Clamping Shaft Collar - 1/2" Hex ID
  • (1) Spartan #25 Chain Tensioner 
  • (6) 1" x 2" x 0.100" Pre-Drilled VersaFrame Aluminum Tube Stock (59") *For non pre-drilled option check item WCP-0082*

Elevator Gearbox Setup
  • (1) VersaPlanetary v2 Base Kit, 1:1, 1/2" Hex Output
  • (1) VersaPlanetary 7:1 Gear Kit 
  • (1) VersaPlanetary 9:1 Gear Kit 
  • (2) VersaPlanetary Ring Gear Add-on Kit
Kit Contents
Greyt Universal Elevator (Base Kit) 
  •  (1) GreyT Elevator Plate Kit
  •  (16) .196" ID x 3/8" OD x 15/16" Long Spacer
  •  (4) .196 ID x 1/2" OD x 3/4" Long Spacer
  •  (5) #4 ID x 1/4" OD x 1/4" Long Spacer
  •  (16) 1/4" ID x 1/2" OD x 1" Long Spacer
  •  (16) 1/4" ID x 1/2" OD x 5/16" Long Spacer
  •  (2) Rope Idler
  •  (2) Ball Joint Rod End 3/8" - 24 Thrd, Right Hand
  •  (1) 10' Amsteel Black
  •  (32) R4 Bearing
  •  (2) BHCS - 3/8"-24 x 2.5
  •  (1) BHCS - 3/8"-16 x 2.5
  •  (5) Thin LockNut - #4-40
  •  (16) Thin LockNut - #10-32
  •  (17) Thin LockNut - 1/4"-20
  •  (1) Thin LockNut - 3/8"-16
  •  (1) EyeBolt - 1/4"-20
  •  (2) Set Screw - #10-32 x 1.25"
  •  (5) SHCS - #4-40 x 1.125"
  •  (4) BHCS #10-32 x .625"
  •  (8) SHCS - #10-32 x 2.5"
  •  (4) SHCS - #10-32 x 4"
  •  (17) BHCS 1/4"-20 x 2.5"
  •  (4) Rod Clevis with Pin for 7/16", 9/16" & 5/8" Bore
CAD Model
Weight